Shibaura CA20-M10, Operating Manual, Page: 336 / 384

18
– 36
Use the numeric keypad to enter a station No.,
and press
ENT
.
STEP 3
Use the numeric keypad to enter a port No.,
and press
ENT
.
STEP 4
Enter the output conditions with
RET
0
,
IN
1
,
TAG
•
. Then press
ENT
.
Key functions for output conditions:
RET
0
Output OFF
IN
1
Output ON
TAG
•
Hold current output state
NOTE

The station No. is a number assigned to each unit. (Refer to section 2.4.4.)

For the station No., port No. and bit No. which can be used, refer to section 10.1.4
"Names of general-purpose input/output ports and Teach Pendant displays".
 Don’t use any port which is not present.
[ P R G M ]
0 0 0 1 P O R T 0 - 0 1
O U T ･ ･ ･ ･ ･ ･ ･ ･
STEP 2