Shibaura CA20-M10, Operating Manual

Page: 250 / 384

13
– 6

13.2.10 OFF (Invalid), easy, point, pulse 1, pulse 2
Select the operation mode with the
ALT
.
When the required mode is displayed, press
ENT
. When
NEXT
is pressed, the next
screen will display, and when
-NEXT
is pressed,
the previous screen will display. Press
ESC
to
return to the PARA mode screen.

When
ALT
is pressed, the mode will display in order as shown below.

The relation of the display and mode is as follows.
OFF
(Invalid)
Sequential mode or palletizing mode Refer to Chapters 4 and 7
EASY Easy mode Refer to Chapter 6
POINT External point designation mode Refer to Chapter 8
PULSE1
Pulse train input mode
(1-clock operation)
Refer to Chapter 9
PULSE2
Pulse train input mode
(2-clock operation)
Refer to Chapter 9

13.2.11 Setting of general-purpose output clear mode
during emergency stop and reset
Switch between Invalid/Valid with
ALT
and
then press
ENT
. When
NEXT
is pressed,
the next screen will display, and when
-NEXT
is
pressed, the previous screen will display. Press
ESC
to return to the PARA mode screen.

When this mode setting is validated, all general-purpose outputs will be turned OFF
during emergency stop or reset.

When continuous start input is set, the continuous start setting will have a priority.
OFF EASY POINT
PULSE1 PULSE2
[ P A R A ] M 1 0
O F F / E A S Y / P O I N T / P U L S E
E N T R Y
[ O F F ]
STEP 1
STEP 1