Shibaura CA20-M10, Operating Manual, Page: 282 / 384

14
– 8

14.5 Origin sensor/encoder Z-phase pulse monitoring
The ON or OFF status of the origin sensor and the output status of the encoder Z-phase pulse
(

Z) is displayed on the system input monitor screen.

Display the initial screen for monitoring.
STEP 1
When the display at left appears, press
F 2
.
STEP 2
Press
F 1
.
STEP 3
Enter the station No. (0 to 3) of the controller to
which the axis to be monitored is connected
and press
ENT
.
STEP 4
The current origin sensor and encoder Z-phase
status will be displayed as bits at the system
input No. 1 and No. 2.
NOTE

The encoder Z-phase monitor is valid only for a master unit.

The JOG key is invalid while monitoring the origin sensor or encoder Z-phase
pulse.
[ M O N I ] F 1 : S T E P
F 2 : I / O
F 3 : C N T / T I M
F 4 : P O S I T I O N
[ M O N I ] F 1 : I N
F 2 : O U T
F 3 :
F 4 :
S
T A T I O N N O . [ 0 ]
[ M O N I S Y S 0 1 : 0 0 0 0 0 0 0 0
- I N ] G E N 0 1 : 0 0 0 0 0 0 0 0
G E N 0 2 : 0 0 0 0 0 0 0 0
G E N 0 3 : 0 0 0 0 0 0 0 0
System
input
Signal name
Bit No. 1 Origin sensor
Bit No. 2 Encoder Z-phase
No. 1
No. 2 Display
“0”: OFF
Display
“1”: ON