Sharp MX-2300N Guide, User Manual, Page: 772 / 786

31
4
If a password has been established,
touch the [Password] key.
Enter the password with the numeric keys (5 to 8 digits) and
touch the [OK] key. Only files that have the same password will
be selected.
If you do not wish to enter a password, go to the next step.
5
To set the number of copies, touch the
[Change PRT.No.] key.
If you wish to use the number of copies stored with each file, go
to step 6.
(1) Touch the [Apply the Number from Stored
Setting of Each Job] checkbox so that it is
not selected (
).
(2) Set the number of copies with the
keys.
The number of copies can be also set with the numeric
keys.
(3) Touch the [OK] key.
6
Touch the [Print and Delete the Data] key
or the [Print and Save the Data] key.
If the [Print and Delete the Data] key is touched, the files will be
deleted after printing.
If the [Print and Save the Data] key is touched, the files will be
saved after printing.
If there are no files that match the search conditions, you will
return to the file list screen.
All files that have the specified user name/password can be deleted by touching the [Delete the Data] key.
Batch Print
User 1 All Files
User Name
Name 1
Password
Print and Delete the Data Print and Save the Data
Delete the
Data
Change PRT.No.
Cancel
Enter password via the 10-key pad.
CANCEL OK
Batch Print
User 1 All Files
User Name
Name 1
Password
Print and Delete the Data Print and Save the Data
Delete the
Data
Change PRT.No.
Cancel
Batch Print
Cancel
Cancel
(1 999)
1
OK
Change Print Number
Apply the Number from Stored Setting of
Each Job.
(3) (1)
(2)
Batch Print
User 1 All Files
User Name
Name 1
Password
Print and Delete the Data Print and Save the Data
Delete the
Data
Change PRT.No.
Cancel