Sharp MX-2300N Guide, User Manual, Page: 587 / 786

35
This chapter explains how to enter destination fax numbers.
Destination fax numbers can be entered using the numeric keys, or by calling up a previously stored fax number using
the Address Book or a search number.
ENTERING A FAX NUMBER WITH THE
NUMERIC KEYS
Enter the destination fax number with
the numeric keys.
Entering a pause between digits of the number
Enter a pause after the number used to dial out from a PBX (for example, after "0"), or after the country code when
dialing an international number.
Touch the [Pause] key.
A hyphen "-" is entered when the [Pause] key is touched once.
3
ENTERING DESTINATION FAX
NUMBERS
Take care to enter the correct number.
If an incorrect number is entered...
Press the [CLEAR] key ( ) to clear the number and enter the correct number.
Pause
Next Address
Scan Send
Auto
Quick File
File
Special Modes
Sub Address
Address Book
Fax
Mode Switch
Image
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
8 x11 1
/
2
0312345678-
System Settings for Fax (Administrator): Pause Time Setting (page 178)
This is used to set the length of pauses. The default setting is 2 seconds.