Sharp MX-2300N Guide User Manual Download Page 189

Page: 189 / 786

122

Change Administrator Password

This is used to change the administrator password. Touch the [Change Administrator Password] key and configure the
settings.

Touch the [New Password] key and
enter the new password.

Enter 5 to 32 characters for the password and touch the
[OK] key.

Touch the [Confirmation] key and enter
the password again.

Touch the [OK] key.

• For the procedure for entering text, see

"6. ENTERING TEXT" in the User's Guide.

• For the factory default administrator password, see

"TO THE ADMINISTRATOR OF THE MACHINE" in
the Safety Guide.

• When changing the password, be sure to remember

the new password.

• It is recommended that you periodically change the

administrator password.

System Settings

Change Administrator Password

Enter the administrator password.(From 5 to 32 characters)

New Password

Confirmation

Cancel

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 189 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: