Sharp MX-2300N Guide User Manual Download Page 322

Page: 322 / 786

130

INVERTING THE IMAGE (Mirror Image)

This feature is used to make a copy that is a mirror image of the original.

Place the original.

Place the original face up in the document feeder tray, or face
down on the document glass.

Touch the [Special Modes] key.

Select Image Edit.

(1) Touch the

keys to switch through

the screens.

(2) Touch the [Image Edit] key.

Select Mirror Image.

(1) Touch the [Mirror Image] key so that it is

highlighted.

(2) Touch the [OK] key.

When the [OK] key is touched, you will return to the
special mode screen. Touch the [OK] key to return to the
base screen of the copy mode.

Originals

Mirror image copy

Ready to scan for copy.

2-Sided Copy

Original 8 x11

Output

Special Modes

File

Quick File

Full Color

Color Mode

8 x11R

8 x14
11x17

8 x11

Auto

Exposure

100%

Copy Ratio

Job Detail

Settings

8 x11

Plain

Special Modes

Stamp

Quick File

Image Edit

File

Color

Adjustments

Proof Copy

3/4

(1)

(2)

Image Edit

Photo Repeat

Mirror

Image

Centering

Multi-Page

Enlargement

11x17

Full Bleed

B/W

Reverse

(2)

(1)

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 322 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: