Sharp MX-2300N Guide, User Manual, Page: 620 / 786

68
6
Press the [BLACK & WHITE START] key
(
).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [BLACK & WHITE START] key (
). Repeat until all
pages have been scanned and then press the [Read-End]
key.
A beep will sound to indicate that scanning is finished.
• The time can be specified up to a week in advance.
• Up to 94 timer transmissions can be stored at once.
• Only one timer polling operation can be stored at once. If you wish to poll from multiple machines, store a serial polling
timer operation.
• If another transmission is in progress when the specified time arrives, the timer operation will begin after that transmission
is finished.
• Other operations can be performed after a timer transmission is set up.
• Dialing with the speaker and direct transmission cannot be used in a timer transmission.
• If you give priority to a timer transmission in the job status screen, the timer setting will be canceled and the transmission
will begin after the job in progress is finished.
☞
GIVING PRIORITY TO A RESERVED FAX JOB (page 56)
To cancel timer transmission...
Touch the [Cancel] key in the screen of step 4.