Sharp MX-2300N Guide, User Manual, Page: 212 / 786

20
7
Set the number of copies (sets) with the
numeric keys.
• Up to 999 can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
8
Press the [COLOR START] key ( )
or the [BLACK & WHITE START] key
(
).
Scanning begins.
If you are using the sort function or other function that requires
all originals to be scanned before the copies are printed, you
must use the same [START] key that you used to scan the first
original to scan each of the remaining originals.
9
Remove the original and place the next
original, and then press the [COLOR
START] key (
) or the [BLACK &
WHITE START] key ( ).
If you are using the sort function or other function that requires
all originals to be scanned before the copies are printed, you
must use the same [START] key that you used to scan the first
original to scan each of the remaining originals.
Repeat this step until all originals have been scanned.
10
Touch the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
7
2-Sided Copy
or
or
Place next original. Press [Start].
When finished, press [Read-End].
Read-End