manualshive.com logo in svg

Sharp MX-2300N Guide, User Manual, Page: 38 / 786

Share
Download
Sharp MX-2300N Guide User Manual Download Page 38

37

Placing a thick book

When scanning a thick book or other thick original, follow the steps below to press the book down.

(1) Push up the far side of the automatic 

document feeder.

The hinges supporting the automatic document feeder 
will release and the rear side of the automatic document 
feeder will rise.

(2) Gently close the automatic document 

feeder.

(2)

(1)

Caution

•

Do not close the automatic document feeder suddenly. This may damage the automatic document feeder and your 
hand may become caught between the automatic document feeder and the machine.

•

Do not place your hands inside the automatic document feeder. Your hand may become caught between the automatic 
document feeder and the machine.

The automatic document feeder cannot be closed correctly in this state. To return the automatic document feeder to its 
normal state, open it completely and then close it.

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments