Sharp MX-2300N Guide, User Manual, Page: 563 / 786

11
FAX TRANSMISSION SEQUENCE
This section explains the basic procedure for sending a fax.
Place the original.
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
Change the mode.
Change to fax mode.
Touch the [Mode Switch] key and then touch the [Fax] key.
☞
BASE SCREEN OF FAX MODE (page 6)
Select image settings.
Touch the [Image Settings] key to select settings for the
original to be faxed.
• [Exposure] key: Use this key to adjust the exposure of the
image.
☞
CHANGING THE EXPOSURE (page
29)
• [Resolution] key: Use this key to adjust the resolution of the
image.
☞
CHANGING THE RESOLUTION
(page 28)
• [Original] key: Use this key to select the original size, the
original send size and two-sided original
scanning.
☞
SPECIFYING THE ORIGINAL SCAN
SIZE AND SEND SIZE (Enlarge/Reduce
Sending)
(page 30), AUTOMATICALLY
SCANNING BOTH SIDES OF AN
ORIGINAL (2-sided original)
(page 34)
• [Special Modes] key: Touch this key to use a convenient
special mode.
1 1
Quick File
File
Special Modes
Address Entry
Address Book Fax
PC Scan
USB Mem. Scan
Internet Fax
Scan
Mode Switch
Image
Settings
Send Settings
Quick File
File
Special Modes
Sub Address
Address Book
Fax
Mode Switch
Image
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
Auto
Exposure
Standard
Resolution
Original
Special Modes
Auto 8 x11 1
/
2