Sharp MX-2300N Guide User Manual Download Page 579

Page: 579 / 786

• When the speaker is used, transmission takes place without scanning the original into memory.

• A destination that includes an F-code (sub-address and passcode) cannot be used.

• A one-touch key that has multiple destinations or has a non-fax destination cannot be used.

System Settings for Fax (Administrator):

Speaker Settings

(page 178)

The default volume level of "Speaker" can be changed in the "Speaker Settings".

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 579 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: