Sharp MX-2300N Guide, User Manual, Page: 702 / 786

150
5
Enter a box name.
(1) Touch the [Box Name] key.
The box number (No.) that automatically appears is the
lowest number that has not yet been programmed.
(2) Enter a box name on the text entry screen
that will appear.
Enter up to 18 characters for the name.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
6
Touch the [Sub Address] key.
7
Enter a sub-address and passcode.
(1) Enter a sub-address.
Enter a sub-address with the numeric keys (maximum of
20 digits).
(2) Enter a passcode.
Touch the [Pass Code] key and enter a passcode with the
numeric keys (maximum of 20 digits).
If you do not need to store a passcode, go to the next
step.
(3) Touch the [OK] key.
• " " and "#" cannot be used in a sub-address.
• When the [Pass Code] key is touched, "/" appears.
If an incorrect entry is made...
Press the [CLEAR] key ( ) and enter the correct digits.
8
Touch the [Exit] key.
To program another memory box...
Touch the [Next] key and repeat the procedure from step 5.
F-Code Memory Box / Polling Memory
No.001
Exit Next
Box Name
Sub Address
No.001
Exit Next
Box Name
Polling Memory
Sub Address
F-Code Memory Box / Polling Memory
Next Exit
OK Cancel
No.001
Sub Address / Pass Code
Enter the sub address / pass code via the 10-key pad,then press [OK].
Pass Code
000000 / 111111
F-Code Memory Box / Polling Memory
(1) (2) (3)
F-Code Memory Box / Polling Memory
No.001
Exit Next
Box Name
Polling Memory
000000/111111
Sub Address
Registration is completed.