manualshive.com logo in svg

Sharp MX-2300N Guide, User Manual, Page: 61 / 786

Share
Download
Sharp MX-2300N Guide User Manual Download Page 61

60

Caution

•

Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

•

Store toner cartridges out of the reach of small children.

•

If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality 
and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• If any one of the toner colors runs out (including black toner), color copying will not be possible. If Y, M, or C toner runs out 

but Bk toner remains, black and white copying will still be possible.

• Keep the used toner cartridge in a plastic bag (do not discard it). The service technician will collect the used toner cartridge 

at the time of maintenance.

• To view the approximate amount of toner remaining, hold down the [COPY] key during copying, printing, or when the 

machine is idle. The percentage of toner remaining will appear in the display while you hold down the key. When the 
percentage falls to "25-0%", obtain a new toner cartridge and keep it ready for replacement.

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments