Sharp MX-2300N Guide User Manual Download Page 48

Page: 48 / 786

Insert a new staple cartridge into the
staple case.

Push the staple cartridge in until it clicks into place.

Do not remove the seal from the cartridge before inserting the cartridge into the case.

Pull the seal that holds the staples
straight out.

Replace the staple case.

Push the staple case in until it clicks into place.

Push the stapler section back in.

Push the stapler section back in until it locks into its original
position.

Close the front cover.

Make a test print or copy in staple sort mode to verify that stapling takes place correctly.

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 48 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: