Sharp MX-2300N Guide User Manual Download Page 523

Page: 523 / 786

102

Specify the destination.

• Touch the one-touch key for the desired destination and then

the [To] key.

☞

SPECIFYING DESTINATIONS IN THE ADDRESS BOOK

(page 19)

• To specify a destination address in a global address book,

touch the [Global Address Search] key and specify the
address.

☞

CALLING UP A DESTINATION FROM A GLOBAL

ADDRESS BOOK

(page 24)

Press the [COLOR START] key (

)

or the [BLACK & WHITE START] key
(

) to scan the front side of the card.

If the destination is an Internet fax destination, press the [BLACK & WHITE START] key (

Turn the card over and press the
[COLOR START] key (

) or the

[BLACK & WHITE START] key (

) to

scan the reverse side of the card.

Press the same [START] key that was used to scan the front
side.

Touch the [Read-End] key in the touch
panel.

The ratio cannot be specified and the Rotation Sending Setting cannot be selected.

To cancel the card shot...

Touch the [Cancel] key in the screen of step 5.

AAA AAA

CCC CCC

EEE EEE

BBB BBB

DDD DDD

FFF FFF

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

1/1

Frequent Use

Sort Address

Address Review

Condition

Settings

Global

Address Search

Bcc

Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End]

Read-End

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 523 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: