Sharp MX-2300N Guide User Manual Download Page 286

Page: 286 / 786

Touch the [Read-End] key.

Copying will begin.

To cancel scanning of the original and copying...

Press the [STOP] key (

• Scan the originals from the first page to the last page. The order of copying will be automatically adjusted by the machine.

• Four original pages will be copied onto each sheet of paper. Blank pages may be automatically added at the end

depending on the number of original pages.

• If a saddle stitch finisher is installed, the book copy function can be used in combination with the saddle stitch function.

• When book copy is selected, 2-sided copying is automatically selected. When settings that prevent 2-sided copying are

selected, the book copy function cannot be used.

To cancel book copy...

Touch the [Cancel] key in the screen of step 3.

Place next original. Press [Start].
When finished, press [Read-End].

Read-End

Summary of Contents for MX-2300N Guide



















































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2300N Guide, User Manual, Page: 286 / 786

Search results

Summary of Contents for MX-2300N Guide

Reviews: