Sharp MX-2300N Guide, User Manual, Page: 575 / 786

23
USING THE DOCUMENT GLASS TO SEND A FAX IN
DIRECT TRANSMISSION MODE
When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.
1
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
2
Touch the [Direct TX] key.
Original size
detector
8-1/2" x 11"R
8-1/2" x 11"
5-1/2" x 8-1/2"
11" x 17"
8-1/2" x 14"
Document glass scale
mark
Document glass scale
mark
Quick File
File
Special Modes
Sub Address
Speaker Resend
Scan Send
Auto
Address Book
Fax
Mode Switch
Direct TX
Memory TX
Auto Reception
Ready to send.
Image
Settings
Fax Memory:100%
8 x11 1
/
2