Sharp MX-2300N Guide, User Manual, Page: 760 / 786

19
ORIGINAL SETTINGS FOR "Scan to HDD"
Settings for Scan to HDD are described below.
[Color Mode] key
Touch the [Color Mode] key to open the color mode setting screen for Scan to HDD.
When you have finished selecting the color mode, touch the [OK] key.
The following settings can be selected for the scanning color when the [COLOR START] key ( ) or the [BLACK &
WHITE START] key ( ) is pressed.
[Job Detail Settings] key
Touch the [Job Detail Settings] key to display the [Exposure] key, [Resolution] key, and [Comp. Ratio] key.
(A) [Exposure] key
Use this to adjust the exposure and exposure mode.
(B) [Resolution] key
Use this to select the resolution that will be used when the file is transmitted.
(C) [Comp. Ratio] key
Use this to select the color compression ratio that will be used when the file is transmitted in color.
Start key Mode Scanning method
[COLOR START] key
Full Color The original is scanned in full color. This mode is best for full color originals
such as catalogues.
Even when the original is black and white, it is scanned as a full color
original.
Auto The machine detects whether the original is color or black and white and
automatically selects full color or black and white (grayscale) scanning.
2 Color Only the red areas of the original are changed to the selected color; colors
other than red are scanned in black.
Red, green, blue, cyan, magenta, or yellow can be selected.
[BLACK & WHITE
START] key
Mono 2 Colors in the original are scanned in black and white. This mode is best for
text-only originals.
Grayscale The colors in the original are scanned in black and white as shades of gray
(grayscale).
Scan to HDD
Color Mode
Color
Full Color
Auto
Mono2
Grayscale
2 Color
B/W
OK
Mono2/Auto
Color Mode
Auto
Exposure
Medium
Comp. Ratio
600x600dpi
Resolution
Back
Mono2/Auto
Color Mode
Original
Auto 8 x11
Special Modes
File
Information
Job Detail
Settings
1
/
2
(C)
(A) (B)
Job Detail
Settings