Raritan PX3-3000 series, User Manual, Page: 298 / 875

Chapter 6: Using the Web Interface
274
Configuring Network Services
The PX3 supports the following network communication services.
HTTPS and HTTP enable the access to the web interface. Telnet and SSH
enable the access to the command line interface. See
Using the
Command Line Interface
(on page 444).
By default, SSH is enabled, Telnet is disabled, and all TCP ports for
supported services are set to standard ports. You can change default
settings if necessary.
Note: Telnet access is disabled by default because it communicates
openly and is thus insecure.
Submenu command Refer to
HTTP Changing HTTP(S) Settings (on page 275)
SNMP
Configuring SNMP Settings
(on page 276)
SMTP Server
Configuring SMTP Settings
(on page 278)
SSH Changing SSH Settings (on page 280)
Telnet Changing Telnet Settings (on page 281)
Modbus
Changing Modbus Settings
(on page 281)