Raritan PX3-3000 series, User Manual

Page: 575 / 875

Chapter 8: Using the Command Line Interface
551
Changing the Inlet Name
This command syntax names an inlet.
config:# inlet <n> name "<name>"
Variables:

<n> is the number of the inlet that you want to configure. For a
single-inlet PDU, <n> is always the number 1. The value is an integer
between 1 and 50.

<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Enabling or Disabling an Inlet (for Multi-Inlet PDUs)
Enabling or disabling an inlet takes effect on a multi-inlet PDU only.
This command enables or disables an inlet.
config:# inlet <n> enabled <option>
Variables:

<n> is the number of the inlet that you want to configure. For a
single-inlet PDU, <n> is always the number 1. The value is an integer
between 1 and 50.

<option> is one of the options:
true or false.
Option Description
true The specified inlet is enabled.
false The specified inlet is disabled.
Note: If performing this command causes all inlets to be disabled, a
warning message appears, prompting you to confirm. When this occurs,
press y to confirm or n to cancel the operation.