Raritan PX3-3000 series, User Manual

Page: 226 / 875

Chapter 6: Using the Web Interface
202
Column Description
Serial Number This is the serial number printed on the sensor
package's label. It helps to identify your Raritan
sensors/actuators. See
Finding the Sensor's Serial
Number
(on page 210).
Position The data indicates where this sensor or actuator is
located in the sensor chain.
See Identifying the Sensor Position and Channel
(on page 211).
Actuator Indicates whether this sensor package is an
actuator or not. If yes, the symbol
is shown.
To release or manage sensors/actuators:
When the total of managed sensors/actuators reaches the maximum (32),
you cannot manage additional ones. The only way to manage any
sensor/actuator is to release or replace any managed ones. To replace a
managed sensor/actuator, see
Managing One Sensor or Actuator (on
page 212). To release any one, follow this procedure.
1. Click to make checkboxes appear in front of sensors/actuators.
Tip: To perform the desired action on only one sensor/actuator,
simply click that sensor/actuator without making the checkboxes
appear.
2. Select multiple sensors/actuators.

To release sensors/actuators, you must only select "managed"
ones. See
Sensor/Actuator States
(on page 208).

To manage sensors/actuators, you must only select
"unmanaged" ones.