Raritan PX3-3000 series, User Manual, Page: 41 / 875

Chapter 2: Rackmount, Inlet and Outlet Connections
17
To disconnect a line cord with slide release buttons:
Push both slide release buttons toward the cord while unplugging this
cord.
Installing Cable Retention Clips on the Inlet (Optional)
If your PX3 device is designed to use a cable retention clip, install the clip
before connecting a power cord. A cable retention clip prevents the
connected power cord from coming loose or falling off.
The use of cable retention clips is highly recommended for regions with
high seismic activities, and environments where shocks and vibrations
are expected.
To install and use a cable retention clip on the inlet:
1. Locate two tiny holes adjacent to the inlet.
2. Install the cable retention clip by inserting two ends of the clip into
the tiny holes.
Zero U models 1U/2U models
3. Connect the power cord to the inlet, and press the clip toward the
power cord until it holds the cord firmly.