Raritan PX3-3000 series, User Manual, Page: 567 / 875

Chapter 8: Using the Command Line Interface
543
config:# security roleBasedAccessControl ipv6 rule add <start_ip> <end_ip> <role>
<policy> <insert> <rule_number>
Variables:

<start_ip> is the starting IP address.

<end_ip> is the ending IP address.

<role> is the role for which you want to create an access control
rule.

<policy> is one of the options:
allow or deny.
Policy Description
allow Accepts traffic from the specified IP address
range when the user is a member of the specified
role
deny Drops traffic from the specified IP address range
when the user is a member of the specified role

<insert> is one of the options: insertAbove or insertBelow.
Option Description
insertAbove Inserts the new rule above the specified rule
number. Then:
new rule's number = the specified rule number
insertBelow Inserts the new rule below the specified rule
number. Then:
new rule's number = the specified rule
1

<rule_number> is the number of the existing rule which you want to
insert the new rule above or below.
Modifying a Role-Based Access Control Rule
Depending on what to modify in an existing rule, the command syntax
varies.

IPv4 commands
Modify a rule's IPv4 address range: