Raritan PX3-3000 series, User Manual

Page: 280 / 875

Chapter 6: Using the Web Interface
256
Field/setting Description
Hardware State Check this field to ensure that the PX3 device has
detected a wireless USB LAN adapter. If not,
verify whether the USB LAN adapter is firmly
connected or whether it is supported.
SSID
Type the name of the wireless access point (AP)
Force AP BSSID If the BSSID is available, select this checkbox
BSSID Type the MAC address of an access point
Enable High
Throughput
(802.11n) Enable or disable 802.11n protocol.
Authentication Select an authentication method.

No Authentication: No authentication data is
required.

PSK: A Pre-Shared Key is required.

EAP - PEAP: Use Protected Extensible
Authentication Protocol. Only MSCHAPv2 is
supported. Enter required authentication data
in the fields that appear.
Pre-Shared Key
This field appears only when PSK is selected.
Type the PSK string
Identity
This field appears only when 'EAP - PEAP' is
selected.
Type your user name.
Password
This field appears only when 'EAP - PEAP' is
selected.
Type your password.
CA Certificate
This field appears only when 'EAP - PEAP' is
selected.
A third-party CA certificate may or may not be
needed. If needed, follow the steps below.