Raritan PX3-3000 series User Manual Download Page 775

Page: 775 / 875

Appendix I: Updating the LDAP Schema

751

Locate the user name whose properties you want to adjust in the
right pane. Right-click the user name and select Properties.

Click the Attribute Editor tab if it is not already open. Choose
rciusergroup from the Attributes list.

Click Edit. The String Attribute Editor dialog appears.

Type the user role (created in the PX3) in the Edit Attribute field.
Click OK.

Summary of Contents for PX3-3000 series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PX3-3000 series

Reviews:

Raritan PX3-3000 series, User Manual, Page: 775 / 875

Search results

Summary of Contents for PX3-3000 series

Reviews: