Raritan PX3-3000 series, User Manual, Page: 120 / 875

Chapter 5: Introduction to PDU Components
96
Menu command Function
Alerts
Indicates all alerted sensors, if any. See Alerts (on page 97).
PDU
Shows the internal beeper's state, and, if it is on, the reason for turning
on.
If your PX3 has multiple inlets, this menu item also shows the total
active power and total active energy.
See PDU (on page 98).
Inlet I1
Shows the inlet I1's information. See
Inlet
(on page 101).
Residual Current
Available only on PX3 models supporting residual current monitoring.
See
Front Panel Operations for RCM (on page 711).
OCPs
Shows a list of overcurrent protector information. See OCPs (on page
102).
Only PX3 models with overcurrent protectors have this menu item.
Outlets
Shows each outlet's information.
If your PX3 supports outlet-switching, you can turn on, off or power cycle
an outlet.
See Outlets (on page 103).
Peripherals
Shows the information of connected Raritan environmental sensors or
actuators, such as the temperature sensor.
You can turn on or off a connected actuator with this command.
See
Peripherals
(on page 109).
Assets
Shows the asset management information if Raritan asset management
equipment is connected to your PX3. See
Assets
(on page 112).
Device Info
Shows the PX3 device's information, such as IP and MAC address. See
Device Info
(on page 116).
Note: To return to the automatic mode, press . See Automatic and
Manual Modes (on page 92).