Raritan PX3-3000 series, User Manual

Page: 98 / 875

Chapter 4: Connecting External Equipment (Optional)
74
3. Connect the asset strip assembly to the PX3 device, using a network
patch cable (CAT5e or higher).

Connect one end of the cable to the RJ-45 connector on the
MASTER asset strip.

Connect the other end of the cable to the FEATURE port on the
PX3 device.
The PX3 device supplies power to the connected asset strip assembly.
All LEDs on the asset strip assembly may cycle through different
colors during the power-on process if the asset strip's firmware is
being upgraded by the PX3. After the power-on or firmware upgrade
process completes, the LEDs show solid colors. Note that the LED
color of the tag ports with asset tags connected will be different from
the LED color of the tag ports without asset tags connected.
(A) MASTER asset strip
(B) Asset tags
(C) IT devices
(D) PX3