Raritan PX3-3000 series, User Manual

Page: 733 / 875

Appendix F: PX3 Models with Residual Current Monitoring
709
To check RCM state and current on the Inlet page:
1. Click Inlet. See Web Interface Operations for RCM (on page 708).
2. Locate the Residual Current Monitor section on the Inlet page.

RCM State: There are five states - normal, warning, critical,
self-test active and failure. For more information, see
RCM
State Sensor
(on page 705).

Residual Operating Current: The magnitude of residual current
detected.
Note: To determine the RCM's normal, warning and critical levels,
configure the RCM current thresholds. See
Setting RCM Current
Thresholds (on page 710).
RCM Critical State Alarm
When a PX3 device's RCM enters the Critical state, the PX3 beeps and
this alarm is displayed in the Alerted Sensors section of the Dashboard
page.
Note that the RCM sensor does not work in the power-sharing mode.
Number Description
The magnitude of residual current reported by the RCM
current sensor.
Critical state reported by the RCM state sensor.
Tip: RCM critical state is also indicated on the Inlet page or the Internal
Beeper section of the PDU page. See
Checking RCM State and Current
(on page 708) or
Internal Beeper State
(on page 161).