Raritan PX3-3000 series, User Manual, Page: 729 / 875

Appendix F: PX3 Models with Residual Current Monitoring
705
power-sharing mode ends. For information on power sharing, see
Power-Sharing Restrictions and Connection (for iX7
™
Only) (on page 47).
RCM State Sensor
The RCM state sensor reports events based on residual current
thresholds or RCM self-test failure.
RCM state Description
Normal Residual current is within normal range.
Warning Residual current is above warning level.
Critical Residual current is above critical level. In addition to an event,
the CRITICAL state causes the PX3 front panel to display a
special error message.
Self-test active RCM diagnostics are running.
Failure RCM current sensor has malfunctioned. Contact Raritan
Technical Support.
Note: The factory default is to disable the Warning state. To define and
enable this state, see
Setting RCM Current Thresholds
(on page 710).
Important: When your PX3 enters the power-sharing mode, the RCM
sensor enters the 'unavailable' state and will not work before the
power-sharing mode ends. For information on power sharing, see
Power-Sharing Restrictions and Connection (for iX7
™
Only) (on page 47).