Raritan PX3-3000 series, User Manual

Page: 516 / 875

Chapter 8: Using the Command Line Interface
492
Enabling or Disabling Peripheral Device Auto Management
This command enables or disables the Peripheral Device Auto
Management feature.
config:# pdu peripheralDeviceAutoManagement <option>
Variables:

<option> is one of the options: enable or disable.
Option Description
enable Enables the automatic management feature for
environmental sensor packages.
disable Disables the automatic management feature for
environmental sensor packages.
For more information, see
How the Automatic Management Function
Works (on page 164).
Setting the Maximum Number of Active Powered Dry Contact Actuators
This command determines the upper limit of "active" powered dry
contact actuators on one PX3 device.
config:# pdu activePoweredDryContactLimit <number>
Variables:

<number> is the number representing the maximum number of
active powered dry contact actuators. Its value ranges between 0 to
24.
Note: An "active" actuator is the one that is turned ON.
Examples
This section illustrates several PDU configuration examples.
Example 1 - PDU Naming
The following command assigns the name "my px12" to the PDU.
config:# pdu name "my px12"