Raritan PX3-3000 series, User Manual

Page: 464 / 875

Chapter 7: Using SNMP
440
SNMP Gets and Sets
In addition to sending notifications, the PX3 is able to receive SNMP get
and set requests from third-party SNMP managers.

Get requests are used to retrieve information about the PX3, such as
the system location, and the current on a specific outlet.

Set requests are used to configure a subset of the information, such
as the SNMP system name.
Note: The SNMP system name is the PX3 device name. When you
change the SNMP system name, the device name shown in the web
interface is also changed.
The PX3 does NOT support configuring IPv6-related parameters
using the SNMP set requests.
Valid objects for these requests are limited to those found in the SNMP
MIB-II System Group and the custom PX3 MIB.
The PX3 MIB
The SNMP MIB file is required for using your PX3 device with an SNMP
manager. An SNMP MIB file describes the SNMP functions.