Raritan PX3-3000 series, User Manual, Page: 453 / 875

Chapter 6: Using the Web Interface
429
You can click the desired DX2-DH2C2 to open its details page, and then
do the following.

View the status of the cabinet door and card reader.
Note: Data of "external" USB card readers is NOT shown on the
SmartLock page. It is shown on the Card Readers page instead.

Configure the door handles connected to DX2-DH2C2. You must set
this because PX3 cannot detect the types of connected door handles.

Control the door handles connected to DX2-DH2C2.
To view the status of the door and card reader:
There are two door handle sections per DX2-DH2C2 because a
DX2-DH2C2 has two door handle ports and two pairs of contact closure
sensor terminals. Before you configure the connected door handle, all
states in the Door State section are "unavailable" by default, and a lock
icon is displayed on each section's top-right corner.
Tip: All sensors of the connected door handles are also listed on the
page of
Peripherals
(on page 200).