Raritan PX3-3000 series, User Manual

Page: 586 / 875

Chapter 8: Using the Command Line Interface
562
d. Press Enter.
To remove an existing SSH public key:
1. Type the same command as shown above.
2. When the system prompts you to input the contents, press Enter
without typing or pasting anything.
Example
The following procedure illustrates how to change the SSH public key for
the user "assistant."
1. Verify that you have entered the configuration mode. See Entering
Configuration Mode
(on page 484).
2. Type the following command and press Enter.
config:# user modify assistant sshPublicKey
3. You are prompted to enter a new SSH public key.
4. Type the new key and press Enter.
Deleting a User Profile
This command deletes an existing user profile.
config:# user delete <name>
Changing Your Own Password
Every user can change their own password via this command if they have
the Change Own Password privilege. Note that this command does not
begin with
user.
config:# password
After performing this command, the PX3 prompts you to enter both
current and new passwords respectively.
Important: After the password is changed successfully, the new
password is effective immediately no matter you type the command
"apply" or not to save the changes.
Example
This procedure changes your own password:
1. Verify that you have entered the configuration mode. See Entering
Configuration Mode
(on page 484).
2. Type the following command and press Enter.