Chapter 6: Using the Web Interface
267
loop (Bridging mode)
or else network loops may occur.
Online cascading information:
For detailed information on the cascading configuration and restrictions,
see the
Cascading Guide, which is available from Raritan website's
Support page
(
Overview of the Cascading Modes
You must apply a cascading mode to the cascading chain. See
Setting
the Cascading Mode
There are two cascading modes: Bridging and Port Forwarding.
In the following illustration, it is assumed that users enable the DHCP
networking for the cascading chain comprising four devices. In the
diagrams, "M" is the master device and "S" is a slave device.
Illustration:
"Bridging" mode:
In this mode, the DHCP server communicates with every cascaded
device respectively and assigns four
different IP addresses. Each
device has its own IP address.
The way to remotely access each cascaded device is completely the
same as accessing a standalone device in the network.
"Port Forwarding" mode:
Summary of Contents for PX3-3000 series
