Raritan PX3-3000 series, User Manual, Page: 507 / 875

Chapter 8: Using the Command Line Interface
483
Clearing Event Log
This command removes all data from the event log.
# clear eventlog
-- OR --
#
clear eventlog
/y
If you entered the command without "
/y
," a message appears,
prompting you to confirm the operation. Type
y
to clear the event log or
n
to abort the operation.
If you type y, a message "Event log was cleared successfully" is
displayed after all data in the event log is deleted.
Clearing WLAN Log
This command removes all data from the diagnostic log for the wireless
LAN (WLAN) connection.
# clear wlanlog
-- OR --
# clear wlanlog /y
If you entered the command without "
/y
," a message appears,
prompting you to confirm the operation. Type
y
to clear the WLAN log or
n
to abort the operation.
If you type y, a message "WLAN log was cleared successfully" is
displayed to indicate all data in the WLAN log has been deleted.
Configuring the PX3 Device and Network
To configure the PX3 device or network settings through the CLI, it is
highly recommended to log in as the administrator so that you have full
permissions.
To configure any settings, enter the configuration mode. Configuration
commands are case sensitive so ensure you capitalize them correctly.