Raritan PX3-3000 series, User Manual

Page: 244 / 875

Chapter 6: Using the Web Interface
220
When the PX3 detects the connection of any listed device, it replaces
'Feature Port' in the menu with that device's name and shows that
device's data/settings instead. See
Asset Strip
(on page 221),
External
Beeper
(on page 230),
Schroff LHX/SHX
(on page 231) and
Power CIM
(on page 236).
When no devices are detected, the PX3 displays the name 'Feature Port"
and the Feature Port page shows the message "No device is currently
connected."
Open the Feature Port page by clicking it in the
Menu
(on page 139).
From this page, you can enable or disable this port's detection capability,
or force it to show a specific device's data/settings even though no device
is detected.
Note: You must enable the LHX/SHX support for the PX3 to detect the
presence of a supported Schroff
®
LHX/SHX heat exchanger. See
Miscellaneous
(on page 384).
To configure the feature port:
1. Click on the top-right corner. The Feature Port Setup dialog
appears.
2. Click the Detection Mode field, and select one mode.
Mode Description
Auto Enable the port to automatically detect the
device connection.
Disabled Disable the port's detection capability.