Raritan PX3-3000 series, User Manual, Page: 674 / 875

Chapter 10: In-Line Monitors
650
Number Section Content
Outlet(s)

Overview of each outlet's power data -- in the above diagram,
there are 4 outlets.

A current bar per outlet, which changes colors to indicate the
RMS current state -- normal (green), warning (yellow) or critical
(red).
This is similar to Dashboard - Inlet I1 (on page 146).
Alerted
Sensors

When no sensors enter the alarmed state, this section shows
the message "No Alerted Sensors."

When any sensor enters the alarmed state, this section lists all
of them.
See Dashboard - Alerted Sensors (on page 150).
Outlet History
The historical chart of the first outlet's active power is displayed by
default.
You can make the diagram show another outlet's or multiple
outlets' active power history or select a different data type. See
instructions below.
Alarms
This section can show data only after you have set event rules
requiring users to take the acknowledgment action.

When there are no unacknowledged events, this section shows
the message "No Alarms."

When there are unacknowledged events, this section lists all of
them.
See
Dashboard - Alarms
(on page 155).
To go to each outlet's setup page:
1. Locate the desired outlet section.