Updating
26
Update Notes
Updating
Updating is done in the following steps:
1.
Open the
System
:
Firmware
page in the
Configurator
. Click on the
Save
button to create a backup copy of the existing configuration. Activate the
audio files
and
Pictures for PictureID
options. Then click on the
Next
button.
2.
Click on the
Browse
button. Select the firmware file. Click on the
Load
button.
This process loads the firmware file to the communications system. After
loading, the communications system re-starts. Then the existing configu-
ration is converted.
3.
Then open the
System
:
Components
page. Select the
Firmware Addons
entry from the selections offered. Take note of the expected file name
displayed. Load the firmware extensions with the
Browse
and
Load
buttons.
4.
Optional: Then open the
System
:
Licences
page. Load the license file.
Then a green tick mark should appear next to the Forum Upgrade entry in
the
Status
column.
After updating, as needed, you can also load the online help file and the audio
files for the additional programs Forum Voicemail and
Forum Auto Attendant.
If you have been operating external SIP lines with customer-specific settings,
you may have to adjust these settings to the extended SIP provider settings
of release 9 (see online help topics “SIP Trunks”, “SIP Provider” and “Notes on
SIP Providers”). As a result of the update, the configured password for the SIP
lines may have been deleted.
Note:
Please also note the information on updating telephony func-
tions (see
