manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 186

Multi-Router Support for SIP Trunks

184

Voice over IP (VoIP)

To operate additional Internet routers (gateways) in the communications 
system, configure the relevant subnets by proceeding as follows.

1.

On the web console in the 

Configurator

, open the 

Network

: 

LAN

 page.

2.

If you want to route the SIP connections via an Ethernet cable that is phys-
ically separated from the company network (see also 

Example 2: SIP 

trunks connected to DSL lines

 starting on page 181), click on the 

Change

 

button. Activate the 

Status

 option under the 

LAN 2

 heading to separate 

the bridges between the two LAN connections of the communications 
system. Enter a new and unused IP address range in the 

IP address

 and 

Network mask

 input fields. 

Note:

The IP address range under LAN 2 should not be the same as 
the company network or one of the SIP Internet routers. 
Therefore, in many cases, you can adopt the defaults 
192.168.100.254 for the 

IP address

 and 255.255.255.0 for the 

Network mask

.

Example 2: SIP trunks connected to DSL lines

Interface

IP address

Network mask

Gateway

LAN 1: Default 
subnet

192.168.99.254

255.255.255.0

192.168.99.1

LAN 2: Subnet 
(SIP provider A)

192.168.98.254

255.255.255.0

192.168.98.1

LAN 2: Subnet 
(SIP provider A)

192.168.97.254

255.255.255.0

192.168.97.1

LAN 2: Subnet 
(SIP provider B)

192.168.96.254

255.255.255.0

192.168.96.1

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands