Mounting Location
32
Installation
Use a shielded Ethernet cable (STP cable, Shielded Twisted Pair cable) to
connect the Forum 5004/5008/5012 communications system to a local
network (LAN, Local Area Network).
Usage
Make sure no fluids to get into the Forum 5004/5008/5012
communications system: electric shock or short circuit may result.
Repairs to the Forum 5004/5008/5012 communications system, and all its
accessories and terminals must be carried out by accredited specialists.
Inappropriate repairs may damage the Forum 5004/5008/5012
communications system and will render any warranty claims invalid.
Keep the Forum 5004/5008/5012 communications system and its
accessories and packaging out of reach of children!
Mounting Location
The ambient temperature for operating the Forum 5004/5008/5012
communications system (wall version) must be b5°C and +40°C.
The power supply must be 230 V/50 Hz AC Using a separate fuse for the
power supply is recommended.
To maintain the prescribed ambient temperature, mount the Forum 5004/
5008/5012 communications system hardware units in a well-ventilated
location away from direct sources of heat.
Mount the Forum 5004/5008/5012 communications system hardware
units on a wall, but:
●
not in front of or above heat sources such as radiators,
●
not in places subject to direct sunlight,
●
not behind curtains,
●
not in small, unventilated, damp rooms,
●
not on or near inflammable materials
●
and not near high-frequency devices such as transmitters, x-ray
equipment or any similar devices.
Connect the device to a separate 230 V power circuit and install a mains
overload filter.
