manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 304

Browser for Forum CTI and Forum Hotel

302

Configuring the PC Software

Configuring the PC Software

Further possibilities of use can be implemented on a workstation computer 
with the Windows operating system by installing drivers and programmes.You 
can find the installation programmes required for this on the product CD that 
comes with the Forum 5004/5008/5012. 

Proceed as follows to install extra software:

1.

Log on under Windows as the administrator.

2.

Insert the product CD. 

If your PC is suitably configured, the CD will start automatically. Otherwise 
select 

Run

 from the Start menu. Click on the 

Browse

 button to look for the 

programme “cd_start.exe” on the CD. Confirm this with 

Open

 and 

OK

.

3.

Select the required option from the start interface. Follow the programme 
instructions.

Further instructions for various options that are available are given below.

Browser for Forum CTI and 
Forum Hotel

You can simplify the daily use of the 

Forum CTI

 and 

Forum Hotel

 Web 

applications using the Web browser especially adapted for the Forum 5004/
5008/5012. Each time the workstation computer is restarted, this browser 
programme can automatically start and log you in. This means that the 
applications are always operational and can be accessed using the icon in the 
information area of the task bar.

Tip:

You can open web applications also in your default browser by 
following a direct link. Copy the desired URL from the menu bar 
of the web console. Past the URL in the address field of your 
browser. 

Installing the browser
1.

Call up the start mask from the product CD (see 

Configuring the PC 

Software

 on page 302).

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands