manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 150

Configuring the Forum 5004/5008/5012

148

Configuration

parameters (such as the port number when a trunk line drops out) are also 
provided.

The mail account for this service (

Account for LOG filter

) is configured in the 

Configurator

, 

Network: E-Mail

 menu.

Loading SW Updates

New versions of the system and terminal software can be loaded to the 
system.

New software versions of the Forum 5004/5008/5012 are loaded from the 
configuration PC, which accesses the 

Configurator

 (see the 

System: 

Firmware

 menu). For information on connecting a configuration PC, see 

Brief 

Guide to Initial Configuration

 on page 139.

The terminal software is part of the Forum 5004/5008/5012 software or 
firmware addons and is automatically loaded into the terminals via the 
Forum 5004/5008/5012 if the software version in the terminal is different 
from the terminal software stored in the Forum 5004/5008/5012.

For further information, refer to the online help documentation under the 
item 

System: Firmware

.

Resetting the System Data

You can restore the factory settings of the Forum 5004/5008/5012 in the 
Configurator.If this is not possible, refer to the next section entitled 

Basic 

Hardware Settings Switch

. 

Please note:

If this is done, all individual settings and the user data are then 
lost. For this reason, you should back up your configuration 
regularly, the best time to do so being after every change. For 
details, refer to the chapter entitled 

Saving and Loading the 

Configuration

 starting on page 144 and to the Web console 

online help.

Proceed as follows:

1.

In the Configurator, call up the 

System

: 

Restart

 menu.

2.

Click on 

Restart with Defaults

.

3.

Confirm this by pressing “OK” when the query dialogue box opens.

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands