manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 331

DECT

Frequently Asked Questions

329

Question: Why is it not possible to occupy an external line in transit 
through another communications system?

There is no configured central (“attendant console”) on the transit 
communications system. Charges for external connections that are generated 
by transit traffic cannot be assigned to a user account on the transit 
communications system. For this reason, the charges are booked on the 
attendant console. 

DECT

Question: The LED of the base station is flashing, but none of the DECT 
devices is functioning.

Make sure the terminal setting for the corresponding U

pn

 port is set to a base 

station (

Configurator

, 

Telephony: Ports: U

pn

 menu).

If multiple base stations are installed, the blinking LED indicates that 
synchronisation is not finished.

Question: The LED of the base station is continuously lit up, but one of the 
cordless DECT devices is indicating “No connection”.

You have not registered this DECT device. Configure a port in the 

Configurator

 

and start the enrolment procedure (

Telephony: Devices: DECT phones

 

menu).

Question: Is it possible to increase the time for the enrolment procedure?

You must manually enter the IPEI of the DECT device in the 

Configurator

. The 

enrolment time is then increased to one hour (

Telephony: Devices: DECT 

phones 

menu).

Question: Another manufacturer’s DECT device is not functioning.

Check whether the DECT device supports the DECT GAP standard. In the 

Configurator

, also make sure 

GAP

 is set for this DECT device (

Telephony: 

Devices: DECT phones 

menu). Possibly, the DECT device doesn't support 

SARI either. Check whether it's possible to update the software of the DECT 
device. Otherwise, the device can only be used with DECTover IP or with a 
DECT base station connected to the call server. 

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands