Configuring the Forum 5004/5008/5012
Configuration
147
Codes for IP Configuration
The IP configuration of the Forum 5004/5008/5012 is performed on the
Web console in the
Configurator
, in the
Network: LAN
menu.
In the event that the IP configuration of the Forum 5004/5008/5012 has to
be changed and access via the Web console is not possible, you can also use a
code digit procedure to change these basic settings. Entry can be made from
analogue telephones and from system telephones.
Set IP address
H
* 1 8 2
Z
(system PIN)
*
Z
(www)
*
Z
(xxx)
*
Z
(yyy)
*
Z
(zzz)
#
Set NET mask
H
* 1 8 3
Z
(system PIN)
*
Z
(www)
*
Z
(xxx)
*
Z
(yyy)
*
Z
(zzz)
#
Note:
The IP configuration will be changed with the next restart of the
communications system.
Example
Enter:
H * 1 8 2
0 0 0 0 * 1 9 2 * 1 6 8 * 9 9 * 2 5 4 #
Initiate a system restart with the following procedure:
Trigger restart
H
*
1 8 5
Z
(system PIN)
#
Use the PIN you entered in the dialogue box for initial access. The factory
setting is “0000”.
Receiving System Messages as E-Mail
Important events and errors are kept by the Forum 5004/5008/5012 in an
internal log book: the error store. To inform or alert the system administrators,
entries in the log book (system messages) can be sent via e-mail.
In order not to notified of every error, the administrator can define
corresponding log filters (in the
Configurator
, the
Diagnosis: Log filter
menu). These filters define which errors (category, severity, number per time
interval) should be notified. The e-mails always include an internal event or
error number, as well as an explanation of the message. Further, extra
