manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 154

Quick Start

152

Voice over IP (VoIP)

Once your IP system telephone has been successfully started, you can set it 
up and use as you would any other U

pn

-based system telephone.

Note:

Use a shielded Cat5 Ethernet cable (STP cable, Shielded 
Twisted Pair cable) to connect an IP telephone to a Local Area 
Network (LAN).

External SIP Line

If your Forum 5004/5008/5012 has access to the Internet, you can an 
easily and quickly set up a SIP line.

1.

Request at least one SIP account from a SIP provider.

2.

Optional, Forum 5012 only: call up the Configurator and go to the page 

Telephony

: 

Gateways

. Click on the corresponding entry. Activate the 

Audio Processor 2

 option (see 

Audio Processor

 starting on page 162).

3.

Call up the Configurator and go to the page 

Telephony

: 

Trunks

: 

SIP 

Provider

. If your SIP provider is not listed, click on 

New

. Otherwise select 

the preconfigured SIP provider. Enter the 

Name

 and 

Domain

. Enter the 

SIP server’s IP address under 

Proxy/Registrar

. You can obtain more infor-

mation on this from your SIP provider. Click on 

Apply

.

4.

On the 

Telephony

: 

Trunks

: 

SIP Trunks

 page, click on 

New

. Activate the 

Status

 and enter a name for the account under 

Name

. Select the 

SIP 

Provider

. Enter the relevant account information under 

User name

, 

Password

, 

Phone No.

 and 

SIP ID

. Click on 

Apply

.

The 

SIP ID

 setting will be used while logging in to the SIP provider. Die 

Phone No.

 setting denotes the external phone number used within the 

public phone network. You can enter this number here to support system 
administration. 

5.

Under 

Telephony: Call distribution: Incoming

 or 

Telephony: Call distri-

bution: Incoming DDI

 route all incoming calls to the desired internal 

numbers. 

6.

To use the SIP account by default, call up the page 

Telephony: Trunks: 

Route 

and select the route 

External trunk. 

Under 

Bundle/SIP trunks 1,

 

select the SIP account you have just set up. 

Otherwise, call up the 

Telephony

: 

Trunks

: 

Route

 page. Enter “SIP”, for 

example, under 

Name

, under 

Code

 the number “8” and select the SIP 

account that was just configured for 

Bundle/SIP trunks 1

. The SIP 

account is now available with the dialling prefix “8”. 

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands