manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

The Proximus Forum 500 Series is a cutting-edge communication device that revolutionizes business collaborations. Enhance your productivity with this sleek and efficient technology. To maximize its potential, don't forget to download the free user manual from manualshive.com. Discover the endless possibilities this device has to offer.

Share
Download
background image

Fundamentals

Voice over IP (VoIP)

161

3.

Activate the 

All codecs

 option. Enter a designation into the 

Profile name

 

input field. Use 

Apply

 to confirm.

Allocate this VoIP profile to the desired SIP terminal or to the desired SIP 
line / SIP tie line. Please note that bandwidth cannot be restricted for 
terminals or lines with this VoIP profile. This is suitable, e.g. for SIP terminals 
operating on a LAN.

Codec interconnection with bandwidth restriction

You can implement bandwidth restriction with additional VoIP profiles using 
an extended codec list. The extended codec list contains definitions for codecs 
which are used by the usual SIP terminals. The codecs on this list are for 
usage in VoIP profiles and are not directly supported by the Forum 5004/
5008/5012 communications system.

You can load the extended list of codecs as a description file in the 

Configurator

 of the Forum 5004/5008/5012 communications system on 

the 

System

: 

Components

 page. The extended codec list is also a part of data 

back-up.

Note:

You can obtain the extended codec list as a description file from 
your Proximus agent. This file should not be edited which is why 
editing is not supported.

Create a VoIP profile with extended codec entries with the following steps:

1.

Open the 

Telephony

: 

Extended: VoIP profile

 page in the 

Configurator

 of 

the Forum 5004/5008/5012 communications system.

2.

Click on the 

Codecs

 button. On the following page, select the codecs to be 

offered for defining a VoIP profile. Use 

Apply

 to confirm.

The list contains entries with various classes (“audio”, “image”, “text”, or 
“video”) as well as specific bandwidth information for many entries. Partic-
ularly suitable entries are indicated as “recommended”.

3.

Click on the 

New

 button on the 

VoIP profile

 page. Enter a designation into 

the 

Profile name

 input field. Determine the permissible codecs in 

descending order in the 10 fields. Configure the desired codecs from the 
extended codec list in the uppermost fields. Close the list with a fall-back 
selection, e.g. with “G.711 A-Law (audio)” and “DTMF (RFC 2833/4733) 
(event)”. Use 

Apply

 to confirm.

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Related manuals for Forum 500 Series

Yealink MVC Series Quick Start Manual preview
MVC Series
Brand: Yealink Pages: 6
Yealink MeetingSpace VC800 Deployment Manual preview
MeetingSpace VC800
Brand: Yealink Pages: 6
Yealink MeetingEye 400 Quick Start Manual preview
MeetingEye 400
Brand: Yealink Pages: 16
Yealink One Talk CP960 Quick Manual preview
One Talk CP960
Brand: Yealink Pages: 4
Yealink One Talk CP960 Quick Start Manual preview
One Talk CP960
Brand: Yealink Pages: 20
Yealink VC400 Administrator'S Manual preview
VC400
Brand: Yealink Pages: 299
Yealink VC210 Teams Edition Quick Start Manual preview
VC210 Teams Edition
Brand: Yealink Pages: 12
Yealink CP860 SERIES Quick User Manual preview
CP860 SERIES
Brand: Yealink Pages: 5
Yealink VC400 Quick Start Manual preview
VC400
Brand: Yealink Pages: 16
Yealink MeetingBar A20 User Manual preview
MeetingBar A20
Brand: Yealink Pages: 30
Yealink MeetingSpace VC200 Quick Start Manual preview
MeetingSpace VC200
Brand: Yealink Pages: 8
Yealink MVC Series: MVC800 Quick Start Manual preview
MVC Series: MVC800
Brand: Yealink Pages: 16
Yealink CP930W Telesystem Quick Reference Manual preview
CP930W Telesystem
Brand: Yealink Pages: 2
Yealink VC110 Quick Start Manual preview
VC110
Brand: Yealink Pages: 16
µ-Dimension COMPETITION ProZ4-80 Manual preview
COMPETITION ProZ4-80
Brand: µ-Dimension Pages: 7
Graco 25A693 Instructions Manual preview
25A693
Brand: Graco Pages: 166
Dolby Laboratories iMeet Configuration Manual preview
iMeet
Brand: Dolby Laboratories Pages: 31
Harman Martin M2GO HD Safety And Installation Manual preview
Martin M2GO HD
Brand: Harman Pages: 20

Brands by name

Popular brands

Load more brands