Omron 3G3RX Series, User Manual

Page: 297 / 442

4-188
4-4 Communication Function
4
Functions
1313h
Free setting, electronic
thermal current 2
b018 R/W 0 to Rated current 0.1 [A]
1314h
Free setting, electronic
thermal frequency 3
b019 R/W 0 to 400 1 [Hz]
1315h
Free setting, electronic
thermal current 3
b020 R/W 0 to Rated current 0.1 [A]
1316h Overload limit selection b021 R/W
0: Disabled
1: Enabled during acceleration/constant
speed
2: Enabled during constant speed
3: Enabled during acceleration/constant
speed (accelerated during
regeneration)
⎯
1317h Overload limit level b022 R/W
200 to 2000 ( 0.4 to 55 kW)
200 to 1800 (75 to 132 kW)
0.1 [%]
1318h Overload limit parameter b023 R/W 10 to 3000 0.01 [s]
1319h Overload limit selection 2 b024 R/W
0: Disabled
1: Enabled during acceleration/
constant speed
2: Enabled during constant speed
3: Enabled during acceleration/constant
speed (accelerated during regenera-
tion)
⎯
131Ah Overload limit level 2 b025 R/W
200 to 2000 ( 0.4 to 55 kW)
200 to 1800 (75 to 132 kW)
0.1 [%]
131Bh Overload limit parameter 2 b026 R/W 10 to 3000 0.01 [s]
131Ch
Overcurrent suppression
function
b027 R/W
0: Disabled
1: Enabled
⎯
131Dh
Frequency pull-in restart
level
b028 R/W
200 to 2000 ( 0.4 to 55 kW)
200 to 1800 (75 to 132 kW)
0.1 [%]
131Eh
Frequency pull-in restart
parameter
b029 R/W 10 to 3000 0.01 [s]
131Fh
Starting frequency at
frequency pull-in restart
b030 R/W
0: Frequency at interruption
1: Max. frequency
2: Set frequency
⎯
1320h Soft lock selection b031 R/W
0: Data other than b031 cannot be
changed when terminal SFT is ON.
1: Data other than b031 and the specified
frequency parameter cannot be
changed when terminal SFT is ON.
2: Data other than b031 cannot be
changed.
3: Data other than b031 and the specified
frequency parameter cannot be
changed.
10: Data can be changed during RUN.
⎯
1321h Not used
⎯ ⎯ ⎯
1322h Not used
⎯ ⎯ ⎯
Register
No.
Function name
Function
code
R/W Monitor and setting parameters Resolution