Mitsubishi Electric MELSERVO-J4 series, Instruction Manual

Page: 636 / 646

634
APPX
Appendix 13 Status of general-purpose AC servo products for compliance with the China RoHS directive
Difference between the China RoHS directive and the EU RoHS directive
The China RoHS directive allows no restriction exemption unlike the EU RoHS directive. Although a product complies with the
EU RoHS directive, a hazardous substance in the product may be considered to be above the limit requirement (marked "

")
in the China RoHS directive.
The following shows some restriction exemptions and their examples according to the EU RoHS directive.
• Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0.35% lead by weight,
lead as an alloying element in aluminum containing up to 0.4% lead by weight, and copper alloy containing up to 4% lead
by weight, e.g. brass-made insert nuts
• Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead)
• Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g.
piezoelectronic devices
• Electrical and electronic components containing lead in a glass or ceramic matrix compound, e.g. chip resistors
Status of our products for compliance with the China RoHS directive (Chinese)
The following table is written in Chinese according to "Management Methods for the Restriction of the Use of Hazardous
Substances in Electrical and Electronic Products".

Page 633 Status of our products for compliance with the China RoHS directive