Mitsubishi Electric MELSERVO-J4 series, Instruction Manual

Page: 408 / 646

406
11 OPTIONS AND PERIPHERAL EQUIPMENT
11.10 Molded-case circuit breakers, fuses, magnetic contactors
For control circuit power supply
When the wiring for the control circuit power supply (L11/L21) is thinner than that for the main circuit power supply (L1/L2/L3),
install an overcurrent protection device (molded-case circuit breaker, fuse, etc.) to protect the branch circuit.
*1 When having the servo amplifier comply with the IEC/EN/UL/CSA standard, refer to the following.

Page 572 Compliance with global standards
Servo amplifier Molded-case circuit breaker
*1
Fuse (Class T) Fuse (Class K5)
Frame, rated
current Voltage AC [V] Current [A] Voltage AC [V] Current [A] Voltage AC [V]
MR-J4-10GF(-RJ) 30 A frame 5 A 240 1 300 1 250
MR-J4-20GF(-RJ)
MR-J4-40GF(-RJ)
MR-J4-60GF(-RJ)
MR-J4-70GF(-RJ)
MR-J4-100GF(-RJ)
MR-J4-200GF(-RJ)
MR-J4-350GF(-RJ)
MR-J4-500GF(-RJ)
MR-J4-700GF(-RJ)
MR-J4-11KGF(-RJ)
MR-J4-15KGF(-RJ)
MR-J4-22KGF(-RJ)
MR-J4-60GF4(-RJ) 30 A frame 5 A 480 1 600 1 600
MR-J4-100GF4(-RJ)
MR-J4-200GF4(-RJ)
MR-J4-350GF4(-RJ)
MR-J4-500GF4(-RJ)
MR-J4-700GF4(-RJ)
MR-J4-11KGF4(-RJ)
MR-J4-15KGF4(-RJ)
MR-J4-22KGF4(-RJ)
MR-J4-10GF1(-RJ) 30 A frame 5 A 240 1 300 1 250
MR-J4-20GF1(-RJ)
MR-J4-40GF1(-RJ)